Monport 220W Dual-port Laser Fume Extractor with 3-Layer Filter for CO2 & fiber Laser Engraver

Power: 220w

Max. airflow speed: 310m³/h

Filter layers: 3

Air inlet diameter: 82mm

Exhaust pipe: 1.4m length, φ75mm

Filter effect: 0.3μm ， 99.97%

Max. noise level: ＜55db

Highest negative pressure: 2200pa

Universal wheels: yes

Control method: remote control with display

Strong Extraction Power
With 220W strong power, the YW220 range hood generates an airflow of 310 cubic meters/hour. It can better absorb visible particles and fine dust around the hood head to achieve an ideal ventilation effect. In addition, it is equipped with two air inlets that can be used for two machines at the same time.
Multi-layer filter
This older range hood is equipped with primary filtration cotton, an H13 filter element and activated carbon. The 3-layer filter offers a purification rate of up to 99.97% to keep the air in the best condition. It effectively filters dust particles above 0.3 microns and absorbs toxic gases, smoke and odors. (Note: Comes with 4 layers of primary filter cotton)
High iodine column carbon
This laser fume hood uses column carbon with a high iodine content of 1000-1100 to provide you with a fresh working environment and ensure respiratory health. (Note: Column carbon is affected by iodine value. The higher the iodine value, the greater the porosity; the larger the surface area, the higher the absorption capacity. Its service life is 1.4 times that of ordinary carbon, and it has higher purification and deodorization capacity than ordinary activated carbon).
Remote control
The fume hood comes with a remote control, which has four functions: power switch, multi-level wind speed adjustment, time setting and safety lock, which effectively improves work efficiency; Filter element clogging alarm: The device will automatically detect the change of the pressure difference of the filter layer and send an audible and visual alarm signal when the filter element is clogged.
Foam sealing
There is foam wadding on the inside of the lid, which not only prevents smoke from leaking, but also improves the air purification effect and helps reduce noise to ensure a quiet working environment.
Humanized design
The body is made of a sturdy metal frame. The vents on both sides of the fuselage help air distribution. The high-definition screen and operation console make it easy to adjust the parameters as needed. The PU wheel and handle ensure easy and convenient operation.
Compatible models
This fume extractor is equipped with two 100mm adapters and bamboo tubes. The 82mm air inlet is suitable for 82mm bamboo tubes and 100mm smoke tubes. It is recommended to use our Co2 engraving machines and optical fiber marking machines with less than 50W. It is also compatible with most diode engraving machines, fiber optic marking machines and CO2 engraving machines on the market.

Extractor hood*1
Extraction pipe*2
Square silicone cover*2
Power cord*1
English manual*1
Remote control*1
Adapter*2
Primary filtration cotton*5
H13 filter element*1
High iodine activated carbon filter*1

1 year warranty on all 220 W laser printers.

You will get the tracking number within 2 business days.

The delivery time varies from 3 to 7 business days.

If the arrived outer package is damaged, please refuse to sign for it and take a photo, then contact Monport via support@monportlaser.uk.

We are very glad to help you with the exchange process.